John Deere X738 Specs, Price & Review 2022
John Deere X738 Specs: The John Deere X738 lawn and garden tractor is a four-wheel drive (4WD) model from the John DeereX-series. John Deere Horicon Works, Horicon, Wisconsin, USA, has produced the John DeereX738 garden tractor since 2013.
John Deere X738 lawn mower used the Kawasaki FD750D EFI motor. Kawasaki FD750D EFI is a 0.75 l (45.46 cu-in) V-twin 90deg internal combustion small gasoline engine with a horizontal shaft.
The FD711D DFI features OHV (overhead valve design), cast-iron cylinder liners, a multi-port digital fuel injector; a high-pressure transistorized petrol pump; flywheel magneto-transistor ignition system.
The cylinder bore and stroke are 78.0mm (3.07in) and 78.0mm (3.07in), respectively. The compression ratio rating of the cylinder is 8.5 to 1. Kawasaki FD750D EFI produced 25.5 HP (19.0 kW), at 3,600 rpm.
John Deere’s X738 tractor comes with the Tuff-Torq K90 shaft-driven, two-pedal foot-controlled hydrostatic transmission (infinite forward/reverse), internal wet disk brakes, and hydrostatic power steering.
The tractor had an open operator station, a 19.7 L (5.2 US gallon) fuel tank, and an internal wet disc brake system.
John Deere X738 Serial Numbers
- 2013: M010001
- 2014: M020001
- 2015: M030001
- 2016: M040001
- 2017: M050001
John Deere X738 Specs
Key Specs | |
| Engine power | 25.5 hp 19 kW |
| Engine manufacturer/model | FD750D EFI |
| Transaxle type | K90 hydrostatic integrated with transaxle |
| Transaxle control | Twin Touch™ pedals |
| Rear tires | 26×12-12 HDAP |
| Steering type | Hydraulic power |
| Lift system type | Two-function hydraulic |
| Cutting width | Accel Deep™ mower deck, 48 in. 122 cm High capacity mower deck, 54, 60 in. 137, 152 cm |
| U.S. warranty | 4 year/700 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Engine | |
| Power | 25.5 hp 19 kW |
| Displacement | 45.5 cu in. 745 cc |
| Manufacturer/model | FD750D EFI |
| Type | Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter |
| Cylinders | V-twin, cast-iron liners |
| Governor | Mechanical |
| Choke/speed control | No choke required |
| Cooling method | Liquid |
| Air cleaner | Dry, replaceable with foam precleaner |
| Oil drain | No tools |
Fuel system | |
| Type | Gasoline |
| Fuel delivery | Electronic fuel injection |
| Fuel gauge | Gauge on dash |
| Fuel tank location | Rear |
| Fuel fill opening | On left fender, 3 in. 7.6 cm |
| Fuel tank capacity | 5.2 U.S. gal. 19.7 L |
Electrical system | |
| Battery | 12 V 300 CCA |
| Charging system | Flywheel alternator, regulated, 20 amp |
| Engine starter | Solenoid shift |
| Hourmeter | Yes |
| Headlights | Two standard, halogen, 37 W |
| Taillights or reflector | Taillights |
| Backup lights | Yes |
| Rear work lights | Yes |
| 12-V outlet | Yes |
Transaxle | |
| Type | K90 hydrostatic integrated with transaxle |
| Control | Twin Touch™ pedals |
| Cruise control | Yes |
| Oil cooler | Yes |
| Oil filter | Replaceable suction side 10 micron |
| Differential lock | Standard |
| Forward speed | 0-8.5 mph 0-13.7 km/h |
| Reverse speed | 0-6 mph 0-9.7 km/h |
| Brakes | Internal wet disc |
Chassis | |
| Frame | Welded heavy-duty |
| Primer/paint | E-coat/powder |
| Weight bracket | Standard front – holds up to four Quik-Tatch weights, 42 lb 19 kg |
| Receiver hitch | Yes, front |
| Front axle | JDM BA8 nodular iron casting |
| Front tires | 18×8.5-10 HDAP |
| Rear tires | 26×12-12 HDAP |
| Hood material | Noryl GTX902, painted |
| Fender deck material | RIM with in-mold paint |
| Floor mats | Sure-grip rubber |
| Storage | Covered toolbox |
| Service interval decal | Yes |
| Fender handles/grips | Handles |
| Cup holder | Yes |
| Equipment mounting | Optional category 1 3-point hitch |
Steering | |
| Type | Hydraulic power |
| Four-wheel steer | Not available on this model |
| Steering wheel | 14 in. 35.6 cm |
| Tilt steering wheel | Standard, six position |
| Turning radius | 25 in. 63.5 cm |
| Uncut circle radius | 54 HC, 32 in. 63.5 cm 60 HC Mower, 28 in. 71.1 cm |
Seat | |
| Type | Two-piece adjustable seat with brand embroidery |
| Seat back height | 21 in. 53.3 cm |
| Armrests | Optional |
| Fore-aft adjustment | While seated, slide rail, 14-position, 7 in. 17.8 cm |
| Seat suspension | Six-position parallel arm |
Lift system | |
| Type | Two-function hydraulic |
| Hydraulic outlets | Four, standard |
| Mower cut height | 1-5.25 in. 2.5-13.3 cm |
| Cut height increments | 0.25 in. 0.64 cm |
| Preset cut height | Yes |
Mower deck | |
| Type | Side discharge |
| Cutting width | Accel Deep™ mower deck, 48 in. 122 cm High capacity mower deck, 54, 60 in. 137, 152 cm |
| Construction | Stamped steel deck shell |
| Mower deck material | 48A, 10 gauge 0.135 in. 3.4 mm 54 HC and 60 HC, 9 gauge 0.15 in. 3.8 mm |
| Mower wash port | Yes |
| Mower drive system | Hydraulic clutch, shaft |
| Mower wheels | Four |
| Mower wheel adjustment | Spring-loaded pin |
| Mower level adjustment | Exact Adjust ports and onboard deck-leveling gauge |
Mower attachability | |
| Type | Roll under tractor (48A) Drive-over deck (54, 60 HC) |
| Front draft arms | Overcenter |
| Rear draft arms | V-align |
| Mower wheels rotate | Yes, 90 degrees for easy mower removal (48X), N/A (54 HC, 60 HC) |
| Drive system | Shaft or AutoConnect |
Safety | |
| Meets ANSI standard | Yes |
| Meets OPEI standard | Yes |
| Backup protection | Reverse Implement Option (RIO) |
| Safety video | Yes |
Buyer’s notes | |
| Notes | Styled alloy wheels are standard equipment One-piece hood for easy engine access Hydraulic modulated PTO clutch for smooth mower and implement engagement |
| Warranty | 4 year/700 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Optional equipment | |
| Mowers | 48A, 54 HC, 60 HC |
| Rear bagger | 7, 14, 19 bu 250, 500, 670 L |
| Powered material collection | Power Flow, 7, 14, 19 bu 250, 500, 670 L |
| Mulching system | Yes, MulchControl™ |
| Front thatcher | 38, 46, 54 in. 96.5, 116.8, 137.2 cm |
| Front blade | 54 in. 137.2 cm |
| Snow blower | Two-stage, 47, 54 in. 119.4, 137.2 cm |
| Rotary broom | 52, 60 in. 132.1, 152.4 cm |
| Rotary tiller | 42, 48 in. 106.7, 121.9 cm |
| 3-point hitch | Category 1 |
| Rear power take-off (PTO) | 540 rpm |
| Plow, moldboard | Adjustable, 8-14 in. 20.3-35.6 cm |
| Box scraper | 48 in. 121.9 cm |
| Cultivator | Adjustable, 30-46 in. 76.2-116.8 cm |
| Rear blade | 60 in. 152.4 cm |
| Disk harrow | Adjustable, 42-52 in. 106.7-132.1 cm |
| Landscape rake | 60 in. 152.4 cm |
| Sprayer | Tow-behind, 15, 25, 45 U.S. gal. 56.8, 96.4, 170.3 L Mounted, 25 U.S. gal. 94.6 L |
| Spreader | Tow-behind only, 125, 175 lb 57.7, 79.4 kg Mounted, 125 lb 57.7 kg |
| Front bumper | Standard bumper/weight bracket |
| Brush guard | Yes |
| Weather protection | Hard-side cab, weather enclosure |
| Rear receiver hitch | 1.25 x 1.25 in. 3.18 x 3.18 cm |
| Bucket holder | Yes, double bucket |
| Grass striping | Grass groomer kit, 48-in. (122-cm) mower only |
| Tractor shovel | 54 in. 137.2 cm |
| Front loader | Not available |
| Tow-behind tools | 21 |
Dimensions | |
| Height | 54.5 in. 138 cm |
| Overall length | 75 in. 190.5 cm |
| Wheelbase | 55.7 in. 141.5 cm |
| Width with mower | 48A, 62.5 in. 159 cm 54 HC, 64.5 in. 163.8 cm 60 HC, 74 in. 188 cm |
| Width with mower (deflector raised for storage) | 48A, 53.6 in. 136 cm 54 HC, 57.5 in. 146.1 cm 60 HC, 62 in. 157.5 cm |
| Width without mower | 47 in. 119.4 cm |
| Weight | No fuel or mower, 953 lb 432 kg |
Following attachments are available for the John Deere X738 garden tractor
- Mid-mount John Deere 48: 1,220 mm (48in) mower deck with 3-blade
- Mid-mount John Deere 54: 1,370mm (54in) mower deck with 3-blade
- John Deere Mid-mount 60 – 1,520mm (60in) mower deck with 3-blade
- Front-mount John Deere 54 snowblower – 1,370mm (54in) dual-stage snowblower with a hydraulic lift
John Deere X738 Review Videos
Final Word
This is all about the John DeereX738 Lawn Tractor Specification and Features. You can also comment below if you have any questions. I will do my best to resolve your issue as quickly as possible. Thanks.
FAQs
How many horsepower is a John Deere X738?
The 25.5-hp (19 kW) liquid-cooled V2-twin engine has a 45.5-in. (745-cc) displacement and provides plenty of power to ensure excellent performance in all operating conditions. It is hinged so that the machine can be opened.
Where is the serial number on a John Deere X738?
This recall applies to John Deere models: X710 and X730, X734, X738, X738, and the X739 lawn-and-garden tractors. Serial numbers that begin with 1M0X are included. The engine hood has two sides. The serial number can be found below the footrest.
Related Posts
- John Deere 2141 Price, Specs, Review 2022
John Deere 2141 Price, Reviews, Specs, Engine Oil Capacity, Weight, Serial Numbers, Features & Pictures…
- John Deere 300 Price, Specs, Review & Attachments 2022
John Deere 300 Price, Reviews, Specs, Horsepower, Serial Numbers, Engine Oil Capacity, Attachments, History, Features…
- John Deere 2400 Specs, Price, Review 2022
John Deere 2400 Price, Reviews, Specs, Engine Oil Capacity, Weight, Serial Numbers, Features & Pictures…
- John Deere 2251 Specs, Price, Review 2022
John Deere 2251 Price, Reviews, Specs, Engine Oil Capacity, Weight, Serial Numbers, Features & Pictures…
ncG1vNJzZmisopawtbvRrKCnnp9ju6bAjqOmoaZdmbKmvsRmr3BraGQ%3D